Tag Archives: Short Action Customs

Ever wondered what goes into creating the most accurate match ammo for the nation’s top 200 shooters? In this post, we reveal the reloading presses and dies the PRS elite trust most, sharing insider insights and surprising preferences. Discover what equipment these pros use to hit single-digit SDs and group sizes below 0.3 MOA!

In the high-stakes world of precision rifle competitions, choosing the right gunsmith can make a huge difference. Our newest article showcases the top picks among pro shooters, featuring insights into the craftsmanship of industry leaders. Which gunsmiths are most popular among the top 200 PRS shooters? Did yours make the cut? Which of those gunsmiths are chambering pre-fits vs custom-chambering them for a specific action? Don’t miss out—read about the legends and up-and-comers shaping the industry!

We’ve seen an explosion of pre-fit barrels over the past few years. But are any of the top-ranked PRS shooters using pre-fits? Are they as accurate as a barrel that is custom-chambered for your action? How do you know if they’re right for you? Our latest post sheds light on the rise of pre-fit barrels, combining historical insights with cutting-edge trends and expert advice from top gunsmiths. Whether you’re a seasoned marksman or a newcomer, this is your guide to understanding the future of precision shooting.

I interviewed the reigning PRS Champion, Austin Buschman, and he shared every detail of his current match ammo load and entire reloading process. Austin has a very pragmatic approach to reloading that I promise will surprise (and challenge) you! Clearly, his ammo is capable of precision that can win on the biggest stage – so get a behind-the-scenes view of how he makes it and hear about all the reloading steps that are on his long “list of things that don’t matter!”

This is the last post in a series of articles focused on bullet jump research that has been conducted more than two years by Mark Gordon of Short Action Customs (Who is Mark Gordon?). In this post, I’ll provide an executive summary of what we covered and provide a few tips for how to apply this new knowledge in our load development. The first article provided a comprehensive overview of what 10+ of the most respected books and reloading manuals had to see about bullet jump and laid the foundation of what bullet jump is, along with other concepts like ...

Are you one of those guys who has been reading this series of posts on bullet jump, and thinking to yourself, “Well, my 0.020” bullet jump sure seems to be working fine. Doubt this would be any improvement over what I’ve already got!” This is the post for you! As Mark started sharing some of his bullet jump findings with a few shooters, he met some skepticism – even from sponsored shooters on his Short Action Customs team. Here is how Mark tells one of those stories:  “After we’d already done most of this bullet research, we had Solomon from ...

This post shares more of Mark Gordon’s research on bullet jump, which is very interesting, original research – and has everyone talking! This post looks at research data on the Hornady’s 6.5mm 147 gr. ELD-M and Tubb’s 6mm 115 gr. DTAC RBT bullets. Check it out!

This landmark article shares new, primary research that Mark Gordon from Short Action Customs has compiled over the past 2 years. He tested a wide range of bullet jumps in several rifle/load configurations, and this post shares the analysis of that data. Mark used a similar approach to the Audette Ladder Test and OCW method, but the goal was to not find the most forgiving powder charge weight, but the most forgiving bullet jump. He wasn’t looking for the specific bullet jump that grouped the best, but the largest window of bullet jumps that provided a similar point of impact. That means the rifle would be more consistent from the start of the match to the end of it or could shoot a particular kind of match-grade factory ammo really well for a longer period of time. Mark’s findings may seem counter to conventional wisdom when it comes to bullet jump, but a few national-level precision rifle competitors also support the idea, which I highlight in this post as well.

This article will focus on the gunsmiths the top precision rifle competitors in the country are using. I recently surveyed the top ranked shooters in both the Precision Rifle Series (PRS) and the National Rifle League (NRL) to learn what gear they’re running in long range rifle matches. (Learn about the PRS & NRL and who I surveyed.) This data represents over 150 of the best precision rifle shooters in the country. (View other What The Pros Use articles) It’s especially important with this topic to start with a balanced perspective: If a gunsmith is on this list, they are ...

I recently surveyed the top 100+ shooters in the Precision Rifle Series (PRS), and this post reviews the gunsmiths those guys trusted to do work on their match rifles. For those not familiar with the PRS, it’s an organization that tracks how 2,000+ competitors place in major rifle matches across the country. PRS matches are tactical/practical long-range rifle matches shot in the field conditions. Typical ranges for steel targets are from 300 to 1200 yards, and they are engaged from prone and improvised positions, often under extreme time pressure. It is one of the fastest growing shooting sports, and has ...