A Data-Driven Approach To Precision Rifles, Optics & Gear
Home / Tag Archives: Barnes Bullets

Tag Archives: Barnes Bullets

G1 BC vs G7 BC vs Bullet-Specific Drag Models

Cal June 9, 2019 Ballistics, ELR, What The Pros Use 40

G1 vs G7

“In the past 4-5 years we’ve made quantum leaps when it comes to predicting bullet trajectories.” –Dave Emary, Ballistician Ever wonder why you center punch targets at some distances, but your dope is a couple clicks off at other distances? Maybe your shots are dead on at 600 yards but off at 1000 yards, or vice versa. In those scenarios we often blame the rifle, scope, ammo, or ourselves, but is our firing solution as accurate as it should be? This article gives practical insight into some important nuances of predicting bullet trajectory, and shows what drag models the top ...

Read More »

Rifle Reloading Data: My Pet Loads for Target & Hunting

Cal August 17, 2013 Ammo & Handloading, Brass, Bullets, Load Development 10

These are some of my pet loads. They were what I found to be the most precise in my rifles after extensive and tedious load development. I may tweak the loads slightly as the throat of a barrel erodes, but I don’t typically vary too far from what is shown here. You should always reference a quality reloading manual and start with the minimum recommended loads and work your way up. Just because these have proven safe in my rifles, doesn’t mean they will be in your’s. Chamber dimensions, brass specs, barrel grooves and diameter can vary, so it’s very important ...

Read More »
© Copyright 2023 PrecisionRifleBlog.com, All Rights Reserved. Unauthorized use and/or duplication of this content, data, or other materials is strictly prohibited without prior express and written permission from the author. You may share excerpts up to 200 words, provided that full and clear credit is given to PrecisionRifleBlog.com with appropriate and specific direction back to the original content, including a direct link or full URL. Absolutely no photos, charts, illustrations, or other images or videos may be reproduced, distributed, transmitted, or referenced without prior express and written permission from the author.

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Disclaimer: Because this site and its affiliates have no control over the individual loading practices and/or components used, no responsibility is assumed by PrecisionRifleBlog.com or its affiliates in the use of this data. The information is to be used at the sole discretion of the user and the user assumes all risk. CAUTION: The author of this blog has not independently verified the accuracy of the data contained on this site. Failure to follow safe loading practices could result in severe personal injury (including death) or gun damage to the user or bystanders. Technical data and information contained herein are intended to provide information based upon the limited experience of individuals under specific conditions and circumstances. They do not detail the comprehensive training, procedures, techniques and safety precautions that are absolutely necessary to properly carry on similar activity. Always consult comprehensive reference manuals and bulletins for details of proper training requirements, procedures, techniques and safety precautions before attempting any similar activity. Be alert - publisher cannot be responsible for errors in published load data.